Find Nitrile Buna NBR Diaphragm Pulse Valve, 1 1/2'' Flange Pulse Jet Valve, 220VAC 24VDC Dust Collector Pulse Valve on Industry Directory, Reliable Manufacturer/Supplier/Factory from China.

Inquiry Basket (0)
Home > Products > Lock body & Cylinder > 1-1/2'' Goyen Type CA45FS Pulse Jet Solenoid Valve

1-1/2'' Goyen Type CA45FS Pulse Jet Solenoid Valve

  • 1-1/2'' Goyen Type CA45FS Pulse Jet Solenoid Valve
  • 1-1/2'' Goyen Type CA45FS Pulse Jet Solenoid Valve
  • 1-1/2'' Goyen Type CA45FS Pulse Jet Solenoid Valve
  • 1-1/2'' Goyen Type CA45FS Pulse Jet Solenoid Valve

1-1/2'' Goyen Type CA45FS Pulse Jet Solenoid Valve

    Payment Type: L/C,T/T,Paypal,Money Gram,Western Union
    Terms of Trade: FOB,CFR,CIF,EXW,FCA
    Min. Order: 1 Set/Sets
    Delivery Time: 4-7 Days
    Packaging: Pallet, Carton, Box
    Productivity: 20000 sets per week
    Brand: Brando
    Transportation: Ocean,Land,Air
    Place of Origin: Ningbo China
    Supply Ability: 100000 sets per month
    Certificate: CE, GB, ISO
    Port: Guangzhou,Shanghai,Ningbo

Basic Info

Model No.: CA45FS

Product Description

1-1/2'' Goyen Type CA45FS Pulse Jet Solenoid Valve


The baghouse dust cleaning device is a system. The pulse jet solenoid valve releases the cleaned air source, which also needs to be transported through the blow tube and distributed to each filter bag. The airflow from the nozzle hole in the spray pipe causes the pressure in the filter bag to rise rapidly and shakes the filter bag, so that the dust collected on the dust-collecting surface of the filter bag can be peeled off, and a good combination of various factors can achieve good results.

Factors affecting the sensitivity of the pulse jet valve switch include solenoid coil power, diaphragm mass, spring elasticity, orifice size, and valve cavity volume. The high sensitivity of the valve response to the electrical signal indicates that the valve has high mechanical coordination during the response to the electrical signal, the valve body component is relatively good in quality, and the cavity structure is relatively reasonable.


Overall dimension of 1 1/2'' CA45FS Goyen Type Pulse Jet Valve:

1 1/2'' CA45FS Goyen Type Pulse Jet Valve


Details display of CA45FS Dust Collector Diaphragm Pulse Valve:

CA45FS Dust Collector Diaphragm Pulse Valve


Technical parameters of FS series Goyen Replacement Pulse Valve:

Model
CAC25FS
CAC45FS
Working Pressure
0.3~0.8Mpa
Working Temperature
-5~+55℃
Voltage
AC24V, AC110V, AC220V, DC24V
Inlet and Out Pipe Size
1 1/2'' IN, 1'' OUT
2'' IN, 1 1/2'' OUT
Remote or Integral
Integral Pilot
Connection Type
Weldless Flange
Body Material
Aluminium ADC12
Diaphragm Material
NBR(Common), Viton(Available)


Pulse Jet Bag Filter Working With Pulse Jet Solenoid Valve:

Pulse Jet Bag Filter working structure with CAC40FS Aluminum (die cast) right angle type pulse diaphragm valve


Dust collector with pulse jet valve:

The dust removal efficiency of bag filter can reach more than 99%, which can meet the environmental protection requirements; it can also better adapt to the fluctuation of exhaust air volume; it has more economic value when recovering valuable fine grain materials, but the initial investment is higher. Bag type dust collectors are often used in the purification of dusty flue gas or powdery materials in furnaces. It is mostly used for gas purification in metallurgy, cement, chemical, light industry and other industries, and is not limited by air volume.


Maintenance of dust collector:
1. The wind-locking device of the dust collector must ensure that the lock air is effective and the material is smoothly discharged. If the lock air is invalid, the negative pressure will be seriously lost in the return ash port, resulting in poor dust collection effect. Material, when the dust is severe, it will be filled with the inside of the dust collector, causing the dust to fail.

2. The pulse valve inspection of the dust collector ensures flexible and effective action. If there is air leakage, the diaphragm and internal corresponding parts (such as: valve core, spring, orifice) should be replaced. If the pulse valve fails, the blowing effect will be poor. The surface area of the filter bag cannot be removed to reduce the dust collection capacity.

3. Check the lifting cylinder of the dust collector to ensure that the lifting cylinder moves smoothly and ensure that the cylinder gland is tightened and not loose. Otherwise, the gland pressure will not be tight and can not be lifted; if the pressure is not tight, it will cause the cleaning to be cleaned. If it cannot be lifted, the corresponding air chamber cannot be collected.

4. The electromagnetic two-way five-way reversing valve inspection, to ensure smooth operation, no air leakage, no dust inside, otherwise it will cause the failure of the lifting cylinder.


Focus on your demands, Offer you best solution:

√ Contact us if some points you have doubt

√ Contact us if somewhere need to change
√ Contact us if not the one you are looking for

√ Contact us if you are doing designing

Welcome to your any question and inquiry!


NINGBO BRANDO HARDWARE CO.,LTD

 

BRANDO is a professional manufacturer and designer of Solenoid Valve, Solenoid Valve Coil and Solenoid Valve Armature Assembly, located in Ningbo, China. And we can serve customers from various industries. Our company has been producing for more than 10 years, and cooperates with different customers such as oil & gas, chemical industry, water treatment, food & beverage, medical system and so on.


BRANDO maintains its high position in the industrial manufacturing. The advanced lathes and milling machinery are introduced, and from materials procurement to finished product and assembly, it is fully automated and controlled by computers, to improve product quality, and to continuously increase production and delivery efficiency.


BRANDO has fully adopted the ISO-9001 quality management system and introduced the most advanced precision equipment for product inspection, such as digital pressure gauges, computer applications, air leak testers, pressure testers and flow testers.


banner 2


Main Services:
1. Customized Design and Production: Brando can design and manufacture customized solenoid valves, solenoid coils and solenoid valve armature components to meet your specific needs and applications. We can provide services from small air treatment devices to large fluid systems.

2. Quality Assurance: In addition to designing and manufacturing high-quality products, Brando also provides 100% testing services for all components to ensure that they achieve the best performance under the best performance and to ensure that it runs well in your project.

3. Delivery and After-sales Service: Brando provides large inventory and on-time delivery within 5 to 10 days. We also provide unparalleled after-sales service and 1 year warranty for all products.



Product range:

1. Solenoid Coil
2. Solenoid Coil Connector
3. Solenoid Valve Armature Assembly
4. Solenoid Valve Timer
5. Brass Solenoid Valve
6. Stainless Steel Solenoid Valve
7. Plastic Solenoid Valve
8. Pneumatic Cylinder
9. Pneumatic Valve
10. Pneumatic Hose Fitting
11. Refrigeration Solenoid Valve
12. Pulse Jet Valve
13. Diaphragm Repair Kit
14. Pulse Controller
15. Air Compressor Auto Drain Valve
16. LPG CNG Injector Rail


Focus on your demands, Offer you best solution:


√ Contact us if some points you have doubt

√ Contact us if somewhere need to change
√ Contact us if not the one you are looking for

√ Contact us if you are doing designing


Welcome to your any question and inquiry!

Company Info

  • Company Name: NINGBO BRANDO HARDWARE CO.,LTD
  • Representative: Lu Jin Jun
  • Product/Service: Solenoid Valve Armatures , Solenoid Valve Coils , Pneumatic Solenoid Valves , Pneumatic Hose Fittings , Pulse Jet Valves , Refrigeration Solenoid Valves
  • Capital (Million US $): 1000,000RMB
  • Year Established: 2008
  • Total Annual Sales Volume (Million US $): US$5 Million - US$10 Million
  • Export Percentage: 81% - 90%
  • Total Annual Purchase Volume (Million US $): US$1 Million - US$2.5 Million
  • No. of Production Lines: 10
  • No. of R&D Staff: 5 -10 People
  • No. of QC Staff: 11 -20 People
  • OEM Services Provided: yes
  • Factory Size (Sq.meters): 3,000-5,000 square meters
  • Factory Location: Ningbo
  • Contact Person: Mr. Brandon Bao
  • Tel: 86-0574-83879820
Email to this supplier
  • *Subject:
  • To:

  • *Messages:
    Your message must be between 20-8000 characters